How to measure gauge on a knitting or crochet swatch
A step-by-step guide to knitting and measuring a gauge swatch, counting stitches accurately, and adjusting your needle or hook size.
Updated 2026-11-22
Cast on about 30 to 40 stitches in worsted weight yarn on 4.5 to 5.5 mm needles, knit every row until the scarf is about 60 to 70 inches long, then bind off. A plain garter stitch scarf in a medium yarn takes one or two skeins.
A scarf is a rectangle: no shaping, no fitting, no finishing beyond weaving in two ends. It teaches the two things every other project needs, the knit stitch and consistent tension, and it gives you a wearable result at the end.
Worsted weight yarn (Craft Yarn Council category 4) on 4.5 to 5.5 mm needles is the forgiving combination for a first scarf: thick enough to see stitches, quick enough to stay motivated. Check the recommended needle size on the label and start there. Smooth, light-colored yarn shows your stitches better than dark or fuzzy yarn.
The scarf's width is your cast-on count divided by your stitch gauge. At the typical worsted gauge of about 4 to 5 stitches per inch, 30 stitches gives a scarf roughly 6 to 7 inches wide, a comfortable everyday size. The stitch calculator converts a target width into an exact cast-on count if you know your gauge.
Use the cast-on you are comfortable with. The long tail cast-on makes a firm, slightly elastic edge that suits a scarf end.
For garter stitch, knit every stitch of every row. Each ridge on the fabric is two rows. Knit until the scarf reaches about 60 to 70 inches, or wraps around the neck with ends hanging where you like them.
Expect the first ten or fifteen rows to look uneven. Tension evens out with practice, and blocking at the end smooths much of what remains.
Bind off on a knit row with the standard method: knit two stitches, pass the first over the second, knit one, repeat to the end. Keep the bind-off loose so the edge matches the cast-on edge's stretch. Weave the two tails into the fabric with a tapestry needle, then soak and lay flat to dry.
A worsted garter scarf of about 7 by 65 inches takes roughly 350 to 450 yards, so a single 200-yard skein is usually not enough but two are plenty. The yarn yardage calculator gives an estimate for your exact dimensions and weight, and the yarn weight chart explains the categories if your yarn is not worsted.
Edges that look like a ladder: the first stitch of each row is being pulled tight. Let the edge stitch stay relaxed and the ladders close up.
The scarf getting wider: stitches are being added at the row ends, usually by knitting into the bump of the first stitch twice. Count stitches every few rows.
Running out of yarn before the end: the scarf is wider or denser than planned. Play yarn chicken knowingly: weigh the remaining yarn and compare with what a row uses, or rip back a few inches and bind off early.
Estimate how much yarn a project needs, in yards and meters.
Find your cast-on and row count for a target size, rounded to a pattern repeat.
Turn a swatch into stitches and rows per 10 cm or 4 inches.
A step-by-step guide to knitting and measuring a gauge swatch, counting stitches accurately, and adjusting your needle or hook size.
How to estimate yarn for a baby blanket or throw in knitting or crochet, what changes the number, and how to buy with a safe buffer.
The magic ring (magic circle) step by step, when it beats a chain start, and how to secure it so it stays closed.